New bottom cushions for the "Re Do" Rattan chairs Here is what the before cushions looked like I used a flat head screw driver and pliers to take out all the staples that held the fabric to the wood board. รง I took the old seat cover and used it to make a pattern to cut out the shape for the new covers. I went to Joann Fabric and bought new cotton batting to make the cushions soft. Once I cut the pattern for the new fabric going on the cushions, I laid the cushion upside down with the new batting onto the wrong side of the new fabric. I used a staple gun and went around the entire cushion pulling the fabric around and stapling into place. Here is what the new seat cushion looks like. Next I will be making new back seat cushions for these chairs and getting them out on the patio!